Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the V-Belt indicator light on the Yamaha Xmax 125?

Model: Yamaha Xmax 125
Part: Warning light – error code

Video tutorial

The V-Belt indicator of the Yamaha Xmax 125 can be reset by turning on the instrument panel, inserting the ignition key into the corresponding block: once the instrument panel is turned on, it will be possible to disconnect the panels located on the front left side.

Here it will be possible to find a connector, which must be disconnected for about five seconds, as shown in the tutorial; once this time has passed, it will be possible to reconnect the connector so that the indicator light turns off completely.

At the end of the procedure, it will be possible to turn off the instrument panel by turning the key.


Posted on 21 December 2024 by ScegliAuto


Related tutorials

How to Reset the V-Belt Warning Light on a Yamaha Xmax 125
How to Reset the V-Belt Warning Light on a Yamaha Xmax 125
Xmax 125 On the Yamaha Xmax 125, resetting the V-Belt warning light involves inserting the key into the ignition switch and turning it to power on the instrum…
How to reset the V-Belt light on the Yamaha Xmax 125?
Xmax 125 To reset the V-Belt light on the Yamaha Xmax 125, insert the key into the ignition barrel and turn it to switch on the instrument cluster. To reset t…
How do you reset the V-Belt light on the Yamaha Xmax 125?
How do you reset the V-Belt light on the Yamaha Xmax 125?
Xmax 125 On board the Yamaha Xmax 125, the V-Belt indicator light can be reset by turning on the instrument panel, inserting the ignition key into its block: …

How to replace the air filter on a Sym VF3I?

To replace the air filter on a Sym VF3I, open the underseat compartment to access the screws and disconnect the battery connectors. The battery will then need to be removed from its housing, allowing access to the components underneath. Here, you will find the filter box cover, which should be removed by unscrewing the fastening screws. Once the old filter is removed, insert the new one into its place and secure the cover with the screws. Then, reinstall the battery and close the underseat compartment.

Watch the video!


by ScegliAuto

More videos