Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sym
    3. : Jet 50

Model: Sym Jet 50
Part: Engine

In order to replace the piston of the Sym Jet 50, you need to loosen the screws that secure the engine block to its seat, so that it is possible to disconnect the tubes and connectors connected to it. The block can then be removed from its seat and it will be possible to proceed by unscrewing the screws that secure the cylinder in its upper part; by removing the cylinder, the piston inside can be located, which can be freed from the connecting rod by removing the pin and the corresponding fixing ring. After removing the old piston, it will be possible to insert the new one and assemble all the removed parts.

Posted on 21 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the air filter of the Sym Jet 14 125?
How do you replace the air filter of the Sym Jet 14 125?
Jet 14 125 It will be possible to replace the air filter of the Sym Jet 14 125 by loosening the screws that secure the cover of the filter box located on the le…
How do you disassemble the engine of the Sym Jet 100?
How do you disassemble the engine of the Sym Jet 100?
Jet 100 In order to disassemble the engine of the Sym Jet 100, you will need to loosen the screws that secure the block to its housing located in the center …
How do you dismantle the engine of the Sym Jet 100?
How do you dismantle the engine of the Sym Jet 100?
Jet 100 It will be possible to completely disassemble the engine of the Sym Jet 100 by unscrewing all the screws that secure the engine to its housing locate…

Where is the Battery on the Piaggio Medley 125 Scooter and How to Remove It?

In this video, see where the battery is located on the Piaggio Medley 125 scooter and how to remove it, a very simple and quick operation. As shown, it is located behind the front storage compartment, positioned under the handlebars. To access it, first open the compartment, then remove the right cover by unscrewing the relevant screws with a cross-head screwdriver. Once done, unscrew the additional screws of the battery cover with a Torx T25 key, extract it, and disconnect both terminals with the same screwdriver. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos