Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Engine from the Sym Jet 125?

Model: Sym Jet 125
Part: Engine

Video tutorial

Removing the engine from the Sym Jet 125 involves loosening the screws that secure the engine block to the frame supports: once the mounting screws are loosened, disconnect the connectors related to the sensors and loosen the screws that secure the pipes connected to the engine.

This will allow you to remove the engine block from its housing, then loosen the screws that secure the cylinder: the piston can be detached from its connecting rod, followed by removing the connecting rod from the crankshaft to access the additional components within the engine block.


Updated on 5 November 2026 by ScegliAuto


Related tutorials

How to Dismantle the Engine of a Sym Jet 125
Jet 125 To dismantle the engine of a Sym Jet 125, loosen all the bolts securing the engine block to its housing at the central lower part of the vehicle. Onc…
Where is the Battery Located on the SYM Jet 125 Scooter?
Where is the Battery Located on the SYM Jet 125 Scooter?
Jet 125 This video shows where the battery is located on the SYM Jet 125 scooter, useful if you need to replace or simply recharge it. As shown, the battery …
How to Replace the Transmission of the Sym Jet 125?
How to Replace the Transmission of the Sym Jet 125?
Jet 125 To replace the transmission of the Sym Jet 125, loosen the screws securing the transmission cover located on the left side of the scooter near the re…

Where is the Spark Plug on a Piaggio Vespa 125 LX Scooter?

In this video, you can see where the spark plug is located on a Piaggio Vespa 125 LX scooter and how to proceed if you need to replace it, a very simple and quick operation. As shown, it is positioned in the upper part of the engine and is accessible from the panel located between the two footrests, which can be opened by unscrewing a single screw. Once done, disconnect the spark plug connector, unscrew the spark plug using a 17mm socket, and remove it from the cylinder head. To install the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos