Do it yourself
Frequently asked questions about cars and motorcycles
In this video we see how to change the oil on a Ducati Hypermotard 939: First, we open the oil top-up cap, then we unscrew the drain plug for the used oil, letting it drain into a container that we will dispose of at an authorized center; right next to it we find the filter, which we will remove with a special wrench: be careful because this will also lose some oil, so let's not waste it. Clean the area well, lubricate the o-ring with new oil and put the filter back in place. Close the oil pan (this would be the right time to put a new cap) and top up the oil - which must be of excellent quality - from above. Pour about 90% of it, then start the motorcycle and re-measure to check the quantity.

Posted on 20 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Hypermotard In this tutorial we can see how to replace the battery in the Ducati Hypermotard 939, an extremely simple and quick operation. First of all, make sur…
Hypermotard To change the engine oil of the Ducati Hypermotard, remove the drain plug located at the central lower part of the bike. Once the oil has drained out…
Hypermotard On the Ducati Hypermotard, all the engine oil can be replaced by loosening the drain plug of the oil pan, located in the central lower part of the ve…

How to Set the Time on the Suzuki V-Storm 650

Here are the instructions to set the time on the Suzuki V-Storm instrument panel by following these simple steps. First, place the motorcycle on its stand and turn on the instrument panel by turning the key to position one. Then, press the left menu button, followed by the button on the left of the rev counter to adjust the hour and then the minutes, as shown in the video. At this point, exit the settings menu and turn off the instrument panel before finally starting the engine!

Watch the video!


by ScegliAuto

More videos