Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you set the clock on the Honda PCX 125?

Model: Honda Pcx 125
Part: Clock

Video tutorial

To set the clock on the Honda PCX 125, you need to turn on the instrument panel by inserting the ignition key into the corresponding block: once the panel is turned on, you can press and hold the button located on the left side of the motorcycle. In this way, you will notice that the clock will start flashing and you will be able to change the hours by pressing the button repeatedly; holding it down will also make the clock advance faster.

After adjusting, you need to release the button for a few seconds, noticing that it will stop flashing.


Posted on 20 December 2024 by ScegliAuto


Related tutorials

How to adjust the clock on the instrument panel of the Honda PCX 125
How to adjust the clock on the instrument panel of the Honda PCX 125
Pcx 125 Today we will explain how to set the clock on a Honda motorcycle. To adjust the clock on the instrument panel of the Honda PCX 125, we need to turn o…
How to set the clock on the Honda PCX 125
How to set the clock on the Honda PCX 125
Pcx 125 These short and simple steps will allow us to change the time on the display of the instrument panel of the Honda PCX 125 scooter. First, we put the …
How to Set the Clock on the Honda PCX 125?
How to Set the Clock on the Honda PCX 125?
Pcx 125 To set the clock on the Honda PCX 125, first turn the ignition on by rotating the key. Then, press and hold the SEL and SET buttons located on either…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos