Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this guide, you will learn how to reset the maintenance service light for the engine oil change on the Aprilia Sportcity 200 scooter. First, place the scooter on the centre stand and press and hold the button on the right handlebar; then turn the ignition key to position one, waiting for the maintenance key light to reset completely, as shown in the video. At this point, turn off the ignition again and wait about ten seconds, then start the engine and check that the light has been reset!

Updated on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Transmission on an Aprilia Sportcity 200
How to Replace the Transmission on an Aprilia Sportcity 200
Sportcity 200 To replace the transmission on an Aprilia Sportcity 200, first loosen the screws securing the cover on the left side of the bike near the rear wheel.…
How to Replace the Rear Shock Absorber on the Aprilia Sportcity 200
How to Replace the Rear Shock Absorber on the Aprilia Sportcity 200
Sportcity 200 To replace the rear shock absorber on the Aprilia Sportcity, you need to loosen the bolts that secure the shock absorber to its housing: the bolts ar…
How to Change the Gear Oil of the Aprilia Sportcity 200
How to Change the Gear Oil of the Aprilia Sportcity 200
Sportcity 200 Follow these step-by-step instructions to change the gear oil of the Aprilia Sportcity 200. First, place the scooter on its centre stand and start by…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos