Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the transmission on an Aprilia Sportcity 200, first loosen the screws securing the cover on the left side of the bike near the rear wheel. Once this cover is removed, you can access the underlying transmission. Dismantle it by loosening the central nut that secures the clutch bell and the variator, while also removing the belt positioned around them. Once all components are removed, you can refit the clutch and variator, then cover everything with the cover.

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Light on an Aprilia Sportcity 200
Resetting the Service Light on an Aprilia Sportcity 200
Sportcity 200 In this guide, you will learn how to reset the maintenance service light for the engine oil change on the Aprilia Sportcity 200 scooter. First, place…
How to Change the Gear Oil of the Aprilia Sportcity 200
How to Change the Gear Oil of the Aprilia Sportcity 200
Sportcity 200 Follow these step-by-step instructions to change the gear oil of the Aprilia Sportcity 200. First, place the scooter on its centre stand and start by…
How to Replace the Rear Shock Absorber on the Aprilia Sportcity 200
How to Replace the Rear Shock Absorber on the Aprilia Sportcity 200
Sportcity 200 To replace the rear shock absorber on the Aprilia Sportcity, you need to loosen the bolts that secure the shock absorber to its housing: the bolts ar…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos