Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today we will discover the instructions that will allow us to change the driving modes or engine mappings on the Aprilia RS 660, as well as on the Tuono 660. First of all, we turn on the instrument panel of the motorcycle; the driving mode is shown at the top of the display on the panel and the engine mapping can be changed through the button located below the red power button, as shown in the video. Among the various driving modes, the dynamic mode stands out, as the most sporty one; it is also possible to modify the driving mode according to one's needs, following the video until the end!

Posted on 20 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter of the Aprilia RS 660
Rs 660 In this brief and simple guide, you will learn how to replace the engine oil and oil filter of the Aprilia RS 660 motorcycle. First, lift the motorcy…
How do you replace the engine oil of the Aprilia RS 660?
How do you replace the engine oil of the Aprilia RS 660?
Rs 660 It will be possible to perform the oil change of the Aprilia RS 660 by unscrewing the oil cap located in the central lower part of the vehicle: once …
How to Change the Engine Oil on an Aprilia RS 660?
How to Change the Engine Oil on an Aprilia RS 660?
Rs 660 In this tutorial, you will learn how to change the engine oil on an Aprilia RS 660, a very simple and quick operation. First, ensure the engine is co…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos