Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the license plate holder of the Keeway RKF 125?

Model: Keeway Rkf 125
Part:

Video tutorial

In order to replace the license plate holder of the Keeway RKF 125, you need to insert the key into the lock located at the bottom left of the saddle: this way, the cover of the top part of the fender will be released and it will be possible to remove it. Here it will also be possible to disconnect the connectors connected to the bulbs next to the license plate; by unscrewing the screws that secure the old license plate holder, it will then be possible to remove it to insert the new one. At this point, it will be possible to reconnect the bulbs and secure the new license plate holder with the screws, reinserting the upper cover of the fender.


Posted on 20 December 2024 by ScegliAuto


Related tutorials

How to Replace the Number Plate Holder on the Keeway RKF 125
How to Replace the Number Plate Holder on the Keeway RKF 125
Rkf 125 Follow the main steps to remove and replace the standard number plate holder on the Keeway RKF 125 motorcycle. First, place your motorcycle on a stan…
How do you replace the clutch of the Keeway RKF 125?
How do you replace the clutch of the Keeway RKF 125?
Rkf 125 The clutch replacement of the Keeway RKF 125 can be carried out by loosening the screws that fix the covering casing located on the right side of the…
How do you replace the exhaust pipe of the Keeway RKF 125?
Rkf 125 The operation of replacing the muffler on the Keeway RKF 125 can be carried out by loosening the screws that secure it at the bottom bracket near the…

How to Change the Engine Oil in the Triumph Tiger 1200 Rally Explorer

In this tutorial, you will see how to change the engine oil in the Triumph Tiger 1200 Rally Explorer, a very simple and quick operation. First, ensure that the engine is cool enough, then remove the lower protective cover, locate the drain hole bolt, and unscrew it using a 7mm hex key. Allow all the oil in the system to drain, unscrew the old filter, and tighten both the replacement and the bolt. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos