Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the exhaust pipe of the Keeway RKF 125?

Model: Keeway Rkf 125
Part: Exhaust muffler

This video is currently unavailable

The operation of replacing the muffler on the Keeway RKF 125 can be carried out by loosening the screws that secure it at the bottom bracket near the crankshaft and at the rear fender of the motorcycle. Once these two screws have been removed, it will be possible to loosen the two screws that secure the connecting clamp to the exhaust pipe at the front of the motorcycle.

In this way, the old muffler can be completely removed from its seat, replacing it with a new spare part; after installation, it will be necessary to verify that everything is functioning correctly.


Posted on 11 January 2025 by ScegliAuto


Related tutorials

How to Replace the Exhaust on a Keeway RKF 125?
How to Replace the Exhaust on a Keeway RKF 125?
Rkf 125 To replace the exhaust on the Keeway RKF 125, loosen the bolts securing it at the lower support near the kickstart and at the rear mudguard of the bi…
How do you replace the exhaust pipe of the Keeway RKF 125?
How do you replace the exhaust pipe of the Keeway RKF 125?
Rkf 125 On board the Keeway RKF 125, it will be possible to replace the exhaust by loosening the screws that fix it at the lower support near the footrest an…
How to Replace the Exhaust on the Keeway RKF 125
How to Replace the Exhaust on the Keeway RKF 125
Rkf 125 The exhaust end can be replaced by loosening the screws that secure it at the lower support near the kickstart and at the rear wheel. Once these two …

How to Change the Engine Oil in a Suzuki DR 350?

In this tutorial, you will see how to change the engine oil in a Suzuki DR 350, a very simple and quick operation. First, wait until the engine is cold enough, then remove the protective frame located at the bottom. Next, position a container underneath the bike, disconnect the indicated hose, and let all the oil in the system drain out. Then, open the filter housing by unscrewing the three bolts with an 8mm spanner, remove the old filter, and insert the replacement. At this point, you can reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos