Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on a Keeway RKF 125?

Model: Keeway Rkf 125
Part: Exhaust muffler

Video tutorial

To replace the exhaust on the Keeway RKF 125, loosen the bolts securing it at the lower support near the kickstart and at the rear mudguard of the bike. Once these two bolts are loosened, you can unscrew the two bolts fixing the front part of the exhaust to the corresponding section of the exhaust pipe.

This will allow you to completely remove the old exhaust from its position, replacing it with a new spare part and ensuring everything is functioning correctly.


Updated on 3 October 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust on a Keeway RKF 125?
How to Replace the Exhaust on a Keeway RKF 125?
Rkf 125 On the Keeway RKF 125, to replace the exhaust, unscrew the bolts securing it to the lower support near the kickstart and at the rear near the mudguar…
How do you replace the exhaust pipe of the Keeway RKF 125?
How do you replace the exhaust pipe of the Keeway RKF 125?
Rkf 125 The replacement of the exhaust terminal of the Keeway RKF 125 can be carried out by loosening the screws that hold it in place at the lower support n…
How to Replace the Exhaust on a Keeway RKF 125?
How to Replace the Exhaust on a Keeway RKF 125?
Rkf 125 To replace the exhaust on the Keeway RKF 125, loosen the screws securing it at the lower support, near the kickstart and at the rear mudguard of the …

How to Change the Engine Oil in a Suzuki DR 350?

In this tutorial, you will see how to change the engine oil in a Suzuki DR 350, a very simple and quick operation. First, wait until the engine is cold enough, then remove the protective frame located at the bottom. Next, position a container underneath the bike, disconnect the indicated hose, and let all the oil in the system drain out. Then, open the filter housing by unscrewing the three bolts with an 8mm spanner, remove the old filter, and insert the replacement. At this point, you can reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos