Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The exhaust terminal of the Keeway RKF 125 can be replaced by loosening the screws that fix it at the lower support near the crank and at the rear wheel. Once these two screws have been loosened, it will be possible to widen the connecting clamp that joins the initial part of the exhaust to the remaining part of the exhaust duct, at the front of the vehicle. In this way, the old exhaust can be completely removed from its seat, replaced with a new spare part, and its correct functioning verified.

Posted on 10 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the Keeway RKF 125?
How do you replace the exhaust pipe of the Keeway RKF 125?
Rkf 125 The operation of replacing the exhaust on the Keeway RKF 125 is carried out by loosening the screws that fix it at the lower support near the cranksh…
How do you replace the exhaust pipe of the Keeway RKF 125?
How do you replace the exhaust pipe of the Keeway RKF 125?
Rkf 125 The operation of replacing the exhaust on the Keeway RKF is carried out by loosening the screws that fix the exhaust terminal at the lower support ne…
How do you replace the exhaust pipe of the Keeway RKF 125?
How do you replace the exhaust pipe of the Keeway RKF 125?
Rkf 125 On board the Keeway RKF 125, it will be possible to replace the exhaust by loosening the screws that fix it at the lower support near the footrest an…

Where is the Battery on the Piaggio Medley 125 Scooter and How to Remove It?

In this video, see where the battery is located on the Piaggio Medley 125 scooter and how to remove it, a very simple and quick operation. As shown, it is located behind the front storage compartment, positioned under the handlebars. To access it, first open the compartment, then remove the right cover by unscrewing the relevant screws with a cross-head screwdriver. Once done, unscrew the additional screws of the battery cover with a Torx T25 key, extract it, and disconnect both terminals with the same screwdriver. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos