Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Side Fairings on the Aprilia RS4 50

Model: Aprilia Rs4 50
Part:

Video tutorial

This guide shows you how to remove and replace the side fairings of the Aprilia RS4 50 motorcycle engine, following the instructions below. First, place your motorcycle on a stand and start unscrewing the side screws with a Torx spanner; you will also find screws under the front headlamp, as shown in the video.

At this point, disconnect the plastic clips found inside the fairings to detach and remove them; then replace them with new ones, ensuring to paint them first, and apply the reverse procedure for reassembly!


Updated on 7 August 2026 by ScegliAuto


Related tutorials

How do you replace the headlight bulb of the Aprilia RS4 125?
How do you replace the headlight bulb of the Aprilia RS4 125?
Rs4 125 In order to replace the headlight bulb of the Aprilia RS4 125, you will need to access the inside of the front fairing, from the sides of the handleb…
How to Change the Engine Oil and Oil Filter on an Aprilia RS4 125
How to Change the Engine Oil and Oil Filter on an Aprilia RS4 125
Rs4 125 This guide shows how to perform routine maintenance by changing the engine oil and oil filter on an Aprilia RS4 125. First, place the motorcycle on a…
How to Replace the Clutch of the Aprilia RS4 125?
How to Replace the Clutch of the Aprilia RS4 125?
Rs4 125 To replace the clutch of the Aprilia RS4 125, you need to loosen the screws securing the clutch cover located on the right side of the bike, just abo…

How to Replace the Suspension Spring on a Husqvarna FC 450

Today, we will see the instructions that will allow you to dismantle and replace the suspension spring of the Husqvarna FC 450 enduro bike. First, position the bike on a stand and start disconnecting the rear swingarm from the suspension by unscrewing the lower pin and disconnecting the linkage; this will allow you to work on the suspension by unscrewing the collar to remove the spring, as shown in the video. At this point, install the new suspension spring, compatible with the original; reassemble the suspension and rear swingarm, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos