Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide shows how to perform routine maintenance by changing the engine oil and oil filter on an Aprilia RS4 125. First, place the motorcycle on a stand and start unscrewing the oil drain bolt located on the sump, allowing it to drain into a container for about ten minutes; then unscrew the screws of the oil filter cover, removing the cartridge and replacing it with a new one, as shown in the video. At this point, unscrew the oil filler cap and top up with new oil (filling to the maximum level).

Posted on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch of the Aprilia RS4 125?
How to Replace the Clutch of the Aprilia RS4 125?
Rs4 125 To replace the clutch of the Aprilia RS4 125, you need to loosen the screws securing the clutch cover located on the right side of the bike, just abo…
How do you replace the headlight bulb of the Aprilia RS4 125?
How do you replace the headlight bulb of the Aprilia RS4 125?
Rs4 125 In order to replace the headlight bulb of the Aprilia RS4 125, you will need to access the inside of the front fairing, from the sides of the handleb…

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos