Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the engine oil of the Malaguti Madison 150, you need to loosen the drain plug located in the central lower part of the vehicle: once this has been removed, you can proceed by placing a container under the vent to collect all the used oil that will be expelled. Once the oil has completely drained, you can close the plug and remove the filter located in the lower part; at this point, you can top up by inserting the necessary quantity from the vent on the right side of the motorcycle.

Posted on 22 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on a Malaguti Madison 150
How to Change the Engine Oil and Oil Filter on a Malaguti Madison 150
Madison 150 Today's instructions will allow you to carry out the routine maintenance service by changing the engine oil and oil filter on the Malaguti Madison 15…
How to Replace the Variator on the Malaguti Madison 150?
How to Replace the Variator on the Malaguti Madison 150?
Madison 150 To replace the variator on the Malaguti Madison 150, you will need to loosen the screws that secure the transmission cover: this is located on the ri…
How to Remove the Engine and Cylinder Head of the Malaguti Madison 150
How to Remove the Engine and Cylinder Head of the Malaguti Madison 150
Madison 150 Follow this guide for instructions on removing the engine block from the chassis and the cylinder head of the Malaguti Madison 150 scooter. First, pl…

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos