Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on the Aprilia Scarabeo 200ie?

Model: Aprilia Scarabeo 200ie
Part: Brake pads

Video tutorial

To replace the brake pads on the Aprilia Scarabeo 200ie, first remove the fixing pins located at the top and bottom of the brake caliper. Once the pins are removed, you can extract the pads from inside the caliper using a lever tool.

Next, detach the caliper from the brake disc by loosening the appropriate bolts. This will allow you to insert the new pads into the caliper, which should then be reattached to the disc using the appropriate bolts.


Updated on 27 April 2026 by ScegliAuto


Related tutorials

How to Replace the Belt on the Aprilia Scarabeo 200ie?
How to Replace the Belt on the Aprilia Scarabeo 200ie?
Scarabeo 200ie To replace the belt on the Aprilia Scarabeo 200ie, loosen the bolts securing the cover of the casing located on the right side of the bike, near the …
How to Set the Clock on an Aprilia Scarabeo 200ie?
How to Set the Clock on an Aprilia Scarabeo 200ie?
Scarabeo 200ie You can adjust the clock on an Aprilia Scarabeo 200ie by inserting the ignition key into the corresponding lock: once the panel is on, press and hold…
How to Dismantle the Variator of the Aprilia Scarabeo 200ie
How to Dismantle the Variator of the Aprilia Scarabeo 200ie
Scarabeo 200ie This guide will show you the procedure to dismantle and replace the variator and belt of the Aprilia Scarabeo 200i scooter. First, place your scooter…

How to Replace the Transmission on the Beta RR 50?

To replace the transmission on the Beta RR 50, loosen the central nuts that secure the sprockets around which the chain is placed: these will be on the left side of the bike. The sprocket will be located in line with the left footpeg, while the other sprocket will be in line with the rear wheel. Once the sprocket is removed, you can completely detach the chain and the respective sprockets by unscrewing the nuts that secure them. At this point, install the new sprockets and position the chain around them to verify that everything is functioning.

Watch the video!


by ScegliAuto

More videos