Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the transmission of the Beta RR 50?

Model: Beta Rr 50
Part: Drivetrain

Video tutorial

In order to replace the transmission of the Beta RR 50, you need to loosen the central nuts that fix the sprockets around which the chain is placed: these will be on the left side of the motorcycle. The front sprocket will be located at the left crank arm, while the rear sprocket will be located at the rear wheel.

Once the front sprocket is removed, you can completely detach the chain and sprockets by unscrewing the nuts that hold them in place. At this point, you can install the new sprockets and place the chain around them to ensure that everything is functioning properly.


Posted on 19 December 2024 by ScegliAuto


Related tutorials

How to Start a Beta RR 50
How to Start a Beta RR 50
Rr 50 Before starting, sit on the seat of your Beta RR 50. First, open the fuel tap. Then, insert the key into the ignition switch and turn it clockwise. O…
Removing the Clutch Cover of the Beta RR 60
Removing the Clutch Cover of the Beta RR 60
Rr 50 Follow the steps to remove and replace the clutch cover or casing of the Beta RR 50 enduro bike. First, place your bike on a stand and start draining…
Replace the Fibreglass on Beta RR 50
Rr 50 In this short video, we will see how to remove and replace the fibreglass inside the silencer of the exhaust on a Beta RR 50 enduro bike. First, remo…

How to Change the Engine Oil in the Triumph Tiger 1200 Rally Explorer

In this tutorial, you will see how to change the engine oil in the Triumph Tiger 1200 Rally Explorer, a very simple and quick operation. First, ensure that the engine is cool enough, then remove the lower protective cover, locate the drain hole bolt, and unscrew it using a 7mm hex key. Allow all the oil in the system to drain, unscrew the old filter, and tighten both the replacement and the bolt. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos