Do it yourself
Frequently asked questions about cars and motorcycles

Model: Beta Rr 50

In this short video, we will see how to remove and replace the fibreglass inside the silencer of the exhaust on a Beta RR 50 enduro bike. First, remove the plastic protection fairing of the exhaust by unscrewing the fixing screw; then unscrew the screw of the silencer bracket to detach it from the collector, as shown in the video. Now use a drill bit to remove the rivets from the silencer to open it; now you can remove the fibreglass inside and replace it with new material!

Updated on 16 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Rr 50 Before you start, head to the rear wheel and lift the bike slightly. Begin by loosening the fastening nut that adjusts the distance of the rear wheel…
Rr 50 To replace the exhaust on the Beta RR 50, you need to loosen the screws that secure the side panel on the right side of the bike, at the rear. Once t…
Rr 50 To disassemble the engine of the Beta RR 50, you need to loosen the fixing screws of the supports that hold the engine in its housing in the center o…

How to Replace the Battery on a Triumph Speedmaster

To replace the battery on a Triumph Speedmaster, start by completely unscrewing the screws that secure the cover located on the left side of the bike, between the air filter cover and the clutch cover. Once this cover is removed, you will have access to the underlying battery, which needs to be disconnected from the appropriate bolts and power cables, extracting it from its housing. At this point, insert the new replacement part, secure it, and connect it, then cover everything with the corresponding cover.

Watch the video!


by ScegliAuto

More videos