Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Beta
    3. :
  3. Rr 50
    4. : How to replace the clutch on the Beta RR 50.

Model: Beta Rr 50
Part: Clutch
How to replace the clutch on the Beta RR 50.

In this guide, we will briefly see the instructions that will allow us to disassemble and replace the clutch discs of the Beta RR 50 enduro motorcycle. First of all, we put the motorcycle on the stand and begin to unscrew the fastening screws of the clutch cover, in order to remove it; then we unscrew the clutch pack screws to remove it, removing one by one all the clutch discs, as shown in the video. At this point, we install the new clutch, subsequently replacing the clutch cover gasket, finally pouring the new gearbox oil up to the maximum level!


Posted on 2 April 2023 by ScegliAuto



Disassembly of the Beta RR 60 clutch cover
Rr 50 Below we will see the steps that will allow us to disassemble and replace the clutch cover or casing of the Beta RR 50 enduro motorbike. First of all
Replacing the clutch discs on Beta 50 RR (AM6)
Rr 50 Let's see in this guide how to remove and replace the clutch plates on a Beta RR 50 with AM6 engine. First we go to drain the engine oil, unscrewing
How do you disassemble the engine of the Beta RR 50?
Rr 50 The disassembly operation of the Beta RR 50 engine is carried out by unscrewing the screws that fix it to the relative supports, so that the engine i

How to set the clock on the Yamaha Xmax 300

To change the time of the Yamaha Xmax 300, keep the "trip" button pressed, at the same time turn the ignition to "on"; release the "trip" button when the time starts flashing; briefly press the "trip" button to set the time; press and hold for a few seconds to confirm and move on to the minutes; briefly press the same button to set the minutes; we long press the same "trip" button to confirm; at this point in the meantime that we hold down the minutes stop flashing the time has been saved correctly and we can turn off the instrument panel.

Watch the video!


by ScegliAuto

More videos