Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta Rr 50
Part: Clutch

This guide shows how to disassemble and replace the clutch discs on a Beta RR 50 with an AM6 engine. First, drain the engine oil by unscrewing the drain bolt located under the engine; then remove the screws securing the water pump, allowing all the fluid to drain. Next, unscrew the screws of the clutch cover, also removing the small cover of the water pump; now unscrew the screws of the clutch pack to remove the plate and the discs, as illustrated in the video. Finally, fit the new ones, alternating cork discs and steel discs!

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Fibreglass on Beta RR 50
Rr 50 In this short video, we will see how to remove and replace the fibreglass inside the silencer of the exhaust on a Beta RR 50 enduro bike. First, remo…
How to replace the exhaust on the Beta RR 50?
How to replace the exhaust on the Beta RR 50?
Rr 50 You can replace the exhaust on the Beta RR 50 by loosening the screws that secure the exhaust terminal to its housing, located near the rear wheel on…
How to Remove the Rear Wheel of a Beta RR50
How to Remove the Rear Wheel of a Beta RR50
Rr 50 Before you start, head to the rear wheel and lift the bike slightly. Begin by loosening the fastening nut that adjusts the distance of the rear wheel…

How to Set the Time on a Piaggio Medley 125

In this video, you will see the dashboard of the Piaggio Medley 125 clearly. The time display is located at the top right of the easy-to-read instrumentation, and changing the time is very simple. On the right, you have the "set" button. Press and hold it for five seconds. When the time starts to flash, just like on a common digital clock, you can modify the hours first, then the minutes, by pressing the button. Holding the "set" button will make the numbers scroll faster. To verify, simply turn off the ignition and then turn it back on to check that the change has been successful.

Watch the video!


by ScegliAuto

More videos