Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Clutch Discs on the Beta RR 50

Model: Beta Rr 50
Part: Clutch

Video tutorial

Today, we will explore the steps to remove and replace the clutch discs on the Beta RR 50 enduro bike. First, place the bike on a stand and begin draining the transmission oil by unscrewing the drain bolt found under the engine; unscrew the screws from the clutch cover to remove it, as shown in the video.

Next, unscrew the screws from the clutch pack, removing each disc one by one; replace them with new original discs, alternating the insertion of the two types of discs, and reassemble everything!


Posted on 25 May 2026 by ScegliAuto


Related tutorials

Rr 50 .. outlines the instructions for disassembling and replacing the clutch discs on the Beta RR 50 enduro bike. First, place the bike on a stand and start.. …
Rr 50 In this short video, we will see how to remove and replace the fibreglass inside the silencer of the exhaust on a Beta RR 50 enduro bike. First, remo…
Rr 50 You can replace the exhaust on the Beta RR 50 by loosening the screws that secure the exhaust terminal to its housing, located near the rear wheel on…

How to Change the Engine Oil in the Triumph Tiger 1200 Rally Explorer

In this tutorial, you will see how to change the engine oil in the Triumph Tiger 1200 Rally Explorer, a very simple and quick operation. First, ensure that the engine is cool enough, then remove the lower protective cover, locate the drain hole bolt, and unscrew it using a 7mm hex key. Allow all the oil in the system to drain, unscrew the old filter, and tighten both the replacement and the bolt. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos