Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Before starting, sit on the seat of your Beta RR 50. First, open the fuel tap. Then, insert the key into the ignition switch and turn it clockwise. Once done, pull the ignition lever located on the right side of the engine block and the brake lever. At this point, push down hard and repeatedly with your foot on the ignition lever until the engine starts. When the engine is running, you can close the ignition lever, and you will have completed the procedure.

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Wheel of a Beta RR50
How to Remove the Rear Wheel of a Beta RR50
Rr 50 Before you start, head to the rear wheel and lift the bike slightly. Begin by loosening the fastening nut that adjusts the distance of the rear wheel…
Guide to disassembling the engine group of the Beta RR 50
Guide to disassembling the engine group of the Beta RR 50
Rr 50 In this guide, we will see the main steps that will allow us to disassemble and replace the thermal unit consisting of the cylinder head, cylinder, a…
Removing the Exhaust on Beta 50 RR
Removing the Exhaust on Beta 50 RR
Rr 50 In this video, follow the main instructions to remove the exhaust from the Beta 50 RR motorcycle, allowing for its restoration by following these sim…

How to Replace the Front Headlight Bulb on a BMW R1150 R?

This tutorial shows how to replace the front headlight bulb on a BMW R1150 R, a very simple and quick task. First, ensure the key is not inserted for safety. Then locate the screw at the bottom edge of the headlight and remove it. Next, separate the headlight from the base, disconnect the power connector, and extract the old bulb by releasing the metal clip. Finally, insert the new bulb without touching the glass with bare hands, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos