Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In today's tutorial, you will learn how to temporarily disable the rev limiter on the Beta RR 50 enduro bike by following the instructions below. First, remove the seat from your bike and locate the rev limiter, which is situated directly beneath the seat. Then, disconnect its electrical connector as shown in the video. Remember that the rev limiter should never be disabled to preserve the engine's functionality, as it could cause irreparable damage; reconnect the wiring to reactivate the rev limiter.

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disconnect the rev limiter cable of the Beta RR 50
How to disconnect the rev limiter cable of the Beta RR 50
Rr 50 For illustrative purposes, we will see how to remove the rev limiter of the Beta RR 50 enduro motorcycle; remember not to keep the rev limiter remove…
Removing the Rev Limiter from a Beta RR 50
Removing the Rev Limiter from a Beta RR 50
Rr 50 In this video tutorial, learn how to remove the rev limiter from a Beta RR 50 in simple steps. First, take a flat screwdriver and unscrew the seat bo…
How to Remove the Rear Wheel of a Beta RR50
How to Remove the Rear Wheel of a Beta RR50
Rr 50 Before you start, head to the rear wheel and lift the bike slightly. Begin by loosening the fastening nut that adjusts the distance of the rear wheel…

Where is the Battery on the Piaggio Medley 125 Scooter and How to Remove It?

In this video, see where the battery is located on the Piaggio Medley 125 scooter and how to remove it, a very simple and quick operation. As shown, it is located behind the front storage compartment, positioned under the handlebars. To access it, first open the compartment, then remove the right cover by unscrewing the relevant screws with a cross-head screwdriver. Once done, unscrew the additional screws of the battery cover with a Torx T25 key, extract it, and disconnect both terminals with the same screwdriver. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos