Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Aprilia Scarabeo 200ie
Part:

This guide will show you the procedure to dismantle and replace the variator and belt of the Aprilia Scarabeo 200i scooter. First, place your scooter on the centre stand and start unscrewing the fixing screws on the side cover of the transmission to remove it. Then, unscrew the nut of the fan and clutch bell, and subsequently remove the drive belt, as illustrated in the video. Now, dismantle and replace the variator with the new one, then reassemble the clutch bell and the transmission cover!

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Belt on the Aprilia Scarabeo 200ie?
How to Replace the Belt on the Aprilia Scarabeo 200ie?
Scarabeo 200ie To replace the belt on the Aprilia Scarabeo 200ie, loosen the bolts securing the cover of the casing located on the right side of the bike, near the …
How to Set the Clock on an Aprilia Scarabeo 200ie?
How to Set the Clock on an Aprilia Scarabeo 200ie?
Scarabeo 200ie You can adjust the clock on an Aprilia Scarabeo 200ie by inserting the ignition key into the corresponding lock: once the panel is on, press and hold…
How to Replace the Rear Brake Pads on the Aprilia Scarabeo 200ie?
How to Replace the Rear Brake Pads on the Aprilia Scarabeo 200ie?
Scarabeo 200ie To replace the brake pads on the Aprilia Scarabeo 200ie, first remove the fixing pins located at the top and bottom of the brake caliper. Once the pi…

How to replace the rear brake pads on the KTM RC 200?

In this tutorial we can see how to replace the rear brake pads on the KTM RC 200, a very simple and quick operation. First of all, position ourselves in front of the brake in question, then locate and release the indicated metal clip. Next, remove the pin, loosen the bleed valve using a wrench, and compress the piston with a flat-head screwdriver. At this point, we can remove the old pads, clean any dirt residue present, and insert the replacements. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos