Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Aprilia
  4. : Scarabeo 200ie

Aprilia Scarabeo 200ie - Videoguide

Aprilia Scarabeo 200ie
How do you set the clock on the Aprilia Scarabeo 200?

In order to set the clock on the Aprilia Scarabeo 200, you need to turn on the instrument panel by rotating the special key inside the ignition switch: this …read all…
Posted on 20 January 2024 by ScegliAuto
Aprilia Scarabeo 200ie
Where is the battery located in the Aprilia Scarabeo 250ie scooter?

In this video, we can see where the battery is located in the Aprilia Scarabeo 250ie scooter and how to proceed in case we need to replace it. As shown, it is …read all…
Posted on 23 August 2023 by ScegliAuto
Aprilia Scarabeo 200ie
How to disassemble the variator of the Aprilia Scarabeo 200ie

In this guide, let's see the procedure that will allow us to disassemble and replace the variator and belt of the Aprilia Scarabeo 200i scooter. First of all, …read all…
Posted on 3 December 2022 by ScegliAuto
Aprilia Scarabeo 200ie
How do you replace the belt on the Aprilia Scarabeo 200ie?

In order to replace the Aprilia Scarabeo 200ie belt, loosen the bolts that secure the crankcase cover located on the right side of the motorcycle, at the rear …read all…
Posted on 17 March 2024 by ScegliAuto
Aprilia Scarabeo 200ie
How to replace the rear brake pads of the Aprilia Scarabeo 200ie?

To be able to replace the brake pads of the Aprilia Scarabeo 200ie you must first remove the fixing pins located in the upper and lower part of the brake …read all…
Posted on 10 March 2024 by ScegliAuto
Battery (1) (1) Checks and maintenance (1) Brake pads (1) (1)

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos