Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the cylinder of the Sym Jet 125?

Model: Sym Jet 14 125
Part: Engine

Video tutorial

In order to replace the cylinder of the Sym Jet 125, you need to loosen the screws that hold it to its housing, in the upper part of the engine block: once the screws have been loosened, you can disconnect the coil and remove the spark plug from the top of the cylinder.

This way you can proceed by directly removing the cylinder from its seat and inserting the new replacement part; the latter can now be fixed to its seat with the appropriate screws, so that it can be verified that everything works correctly.


Posted on 18 December 2024 by ScegliAuto


Related tutorials

How do you replace the air filter of the Sym Jet 14 125?
How do you replace the air filter of the Sym Jet 14 125?
Jet 14 125 It will be possible to replace the air filter of the Sym Jet 14 125 by loosening the screws that secure the cover of the filter box located on the le…
How do you replace the belt of the Sym Jet 14 125?
How do you replace the belt of the Sym Jet 14 125?
Jet 14 125 In order to replace the belt of the Sym Jet 14 125, you need to loosen the screws that fix the transmission cover, located on the left side of the mo…
How do you replace the battery of the Sym Jet 14 125?
How do you replace the battery of the Sym Jet 14 125?
Jet 14 125 It will be possible to replace the battery of the Sym Jet 14 125 by loosening the screws that secure the cover panel located in the lower part of the…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos