Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the belt of the Sym Jet 14 125?

Model: Sym Jet 14 125
Part:

Video tutorial

In order to replace the belt of the Sym Jet 14 125, you need to loosen the screws that fix the transmission cover, located on the left side of the motorcycle near the rear wheel. Once the screws of the cover have been loosened, you will be able to identify the underlying components.

The central nut that fixes the variator and the one that fixes the clutch bell must be loosened, so that the belt can be removed from its housing: the new one can then be inserted to ensure that everything works correctly.


Posted on 11 February 2025 by ScegliAuto


Related tutorials

How do you replace the air filter of the Sym Jet 14 125?
How do you replace the air filter of the Sym Jet 14 125?
Jet 14 125 It will be possible to replace the air filter of the Sym Jet 14 125 by loosening the screws that secure the cover of the filter box located on the le…
How do you replace the cylinder of the Sym Jet 125?
How do you replace the cylinder of the Sym Jet 125?
Jet 14 125 In order to replace the cylinder of the Sym Jet 125, you need to loosen the screws that hold it to its housing, in the upper part of the engine block…
How do you replace the battery of the Sym Jet 14 125?
How do you replace the battery of the Sym Jet 14 125?
Jet 14 125 It will be possible to replace the battery of the Sym Jet 14 125 by loosening the screws that secure the cover panel located in the lower part of the…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos