Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sym
    3. : Jet 14 125

Sym Jet 14 125 - Video guides

Sym Jet 14 125
How to change the engine oil in the SYM Jet 14 125 scooter?
In this tutorial, learn how to change the engine oil in the SYM Jet 14 125 scooter, a very simple and quick operation. First, wait for the engine to cool down …Read all…
Posted on 8 September 2026 by ScegliAuto
Sym Jet 14 125
How to Change the Engine Oil on a Sym Jet 14 125
These brief and simple steps will show you how to change the engine oil while performing routine maintenance on the Sym Jet 14 125 scooter. First, place the …Read all…
Posted on 28 August 2026 by ScegliAuto
Sym Jet 14 125
How to Replace the Spark Plug on a Sym Jet 14 125
These short and simple steps will show you how to remove and replace the spark plug on the Sym Jet 14 scooter. First, place the scooter on the centre stand and …Read all…
Posted on 26 August 2026 by ScegliAuto
Sym Jet 14 125
How to Replace the Air Filter on a Sym Jet 14 125
To replace the air filter on a Sym Jet 14 125, loosen the screws securing the cover panel located near the rear wheel, on the left side of the bike, just above …Read all…
Posted on 15 August 2026 by ScegliAuto
Sym Jet 14 125
How to Change the Engine Oil on a Sym Jet 14 125
You can change the engine oil on the Sym Jet 14 125 by accessing the underside of the vehicle, near the exhaust: here you will find the oil drain plug, which …Read all…
Posted on 8 July 2026 by ScegliAuto
Sym Jet 14 125
How do you reset the warning light on the Sym Jet?
Even mopeds are equipped with a service expiration warning light, just like all other categories of vehicles, in fact we can also find it in the Sym Jet 14. In …Read all…
Posted on 1 October 2025 by ScegliAuto
Sym Jet 14 125
How do you reset the Service light on the Sym Jet 14 125?
It will be possible to completely reset the Service light of the Sym Jet 14 125 by inserting the ignition key into the corresponding slot: once the dashboard …Read all…
Posted on 19 August 2025 by ScegliAuto
Sym Jet 14 125
How do you replace the air filter of the Sym Jet 14 125?
It will be possible to replace the air filter of the Sym Jet 14 125 by loosening the screws that secure the cover of the filter box located on the left side of …Read all…
Posted on 1 August 2025 by ScegliAuto
Sym Jet 14 125
How do you replace the battery of the Sym Jet 14 125?
It will be possible to replace the battery of the Sym Jet 14 125 by loosening the screws that secure the cover panel located in the lower part of the footrest …Read all…
Posted on 25 June 2025 by ScegliAuto
Sym Jet 14 125
How to reset the engine oil light on the Sym Jet 14 125
Today's steps will show us the process of resetting the maintenance service light of the engine oil change for the Sym Jet 14 125 scooter. First, we put the …Read all…
Posted on 14 June 2025 by ScegliAuto
Sym Jet 14 125
How do you replace the tank of the Sym Jet 14 125?
It will be possible to replace the fuel tank of the Sym Jet 14 125 by loosening the screws that secure the underseat compartment of the motorcycle to its …Read all…
Posted on 24 May 2025 by ScegliAuto
Sym Jet 14 125
How do you replace the engine oil of the Sym Jet 14 125?
It will be possible to replace the engine oil of the Sym Jet 14 125 by loosening the drain plug located in the lower rear part of the motorcycle: once the plug …Read all…
Posted on 13 May 2025 by ScegliAuto
Sym Jet 14 125
How do you replace the belt of the Sym Jet 14 125?
In order to replace the belt of the Sym Jet 14 125, you need to loosen the screws that fix the transmission cover, located on the left side of the motorcycle …Read all…
Posted on 11 February 2025 by ScegliAuto
Sym Jet 14 125
How do you reset the engine light of the Sym Jet 14 125?
In order to reset the engine light of the Sym Jet 14 125, it is necessary to connect a diagnostic tool to the OBD port of the vehicle: this port can be found …Read all…
Posted on 29 December 2024 by ScegliAuto
Sym Jet 14 125
How do you replace the cylinder of the Sym Jet 125?
In order to replace the cylinder of the Sym Jet 125, you need to loosen the screws that hold it to its housing, in the upper part of the engine block: once the …Read all…
Posted on 18 December 2024 by ScegliAuto
Sym Jet 14 125
How to Install the Windscreen on the Sym Jet 14 125?
To install the windscreen on the Sym Jet 14 125, use a tool to lever off the trim located beneath the front fairing. Once this trim is removed, you can unscrew …Read all…
Posted on 5 November 2026 by ScegliAuto
Sym Jet 14 125
How to Replace the Speedometer Cable on a Sym Jet 14 125
To replace the speedometer cable on the Sym Jet 14 125, you need to loosen the screws that secure the windscreen to its housing, completely removing it from …Read all…
Posted on 24 October 2026 by ScegliAuto
Sym Jet 14 125
How to Reset the Service Light on the Sym Jet 14 125?
To reset the Sym Jet 14 125, turn on the ignition by inserting the key into the ignition switch: once the dashboard is on, press and hold the S button located …Read all…
Posted on 26 September 2026 by ScegliAuto
Sym Jet 14 125
How to Reset the Oil Service on the SYM Jet 14 125 Scooter
In this tutorial, we will see how to reset the oil service on the SYM Jet 14 125 scooter, a very simple and quick operation. Before proceeding, ensure that you …Read all…
Posted on 25 August 2026 by ScegliAuto
Sym Jet 14 125
How to Reset the Oil Service on the SYM Jet 14 125 Scooter?
In this tutorial, you will learn how to reset the oil service on the SYM Jet 14 scooter, a very simple and quick operation. Before proceeding, ensure you have …Read all…
Posted on 25 October 2026 by ScegliAuto

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos