Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the engine oil of the Sym Jet 14 125?

Model: Sym Jet 14 125
Part: Engine oil

Video tutorial

It will be possible to replace the engine oil of the Sym Jet 14 125 by loosening the drain plug located in the lower rear part of the motorcycle: once the plug has been removed, the used oil can be completely drained out and collected in a container.

At this point, you can proceed by removing and replacing the filter located in the lower part of the vehicle: then you can proceed with inserting the new filter.

In this way, you can complete the top-up by pouring the necessary amount of oil through the vent on the right side of the motorcycle.


Posted on 13 May 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Sym Jet 14 125
Jet 14 125 These brief and simple steps will show you how to change the engine oil while performing routine maintenance on the Sym Jet 14 125 scooter. First, pl…
How do you replace the air filter of the Sym Jet 14 125?
How do you replace the air filter of the Sym Jet 14 125?
Jet 14 125 It will be possible to replace the air filter of the Sym Jet 14 125 by loosening the screws that secure the cover of the filter box located on the le…
How to Change the Engine Oil on a Sym Jet 14 125
How to Change the Engine Oil on a Sym Jet 14 125
Jet 14 125 You can change the engine oil on the Sym Jet 14 125 by accessing the underside of the vehicle, near the exhaust: here you will find the oil drain plu…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos