Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Sym Jet 14 125

Model: Sym Jet 14 125
Part: Engine oil

This video is currently unavailable

These brief and simple steps will show you how to change the engine oil while performing routine maintenance on the Sym Jet 14 125 scooter. First, place the scooter on the centre stand and begin by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes.

Then, clean the small oil filter from metallic residues as shown in the video. Next, unscrew the filler cap and top up with new engine oil that meets the appropriate specifications.


Posted on 28 August 2026 by ScegliAuto


Related tutorials

How do you replace the engine oil of the Sym Jet 14 125?
How do you replace the engine oil of the Sym Jet 14 125?
Jet 14 125 It will be possible to replace the engine oil of the Sym Jet 14 125 by loosening the drain plug located in the lower rear part of the motorcycle: onc…
How to change the engine oil in the SYM Jet 14 125 scooter?
How to change the engine oil in the SYM Jet 14 125 scooter?
Jet 14 125 In this tutorial, learn how to change the engine oil in the SYM Jet 14 125 scooter, a very simple and quick operation. First, wait for the engine to …
How to Change the Engine Oil on a Sym Jet 14 125
How to Change the Engine Oil on a Sym Jet 14 125
Jet 14 125 You can change the engine oil on the Sym Jet 14 125 by accessing the underside of the vehicle, near the exhaust: here you will find the oil drain plu…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos