Do it yourself
Frequently asked questions about cars and motorcycles
These short and simple steps will show you how to remove and replace the spark plug on the Sym Jet 14 scooter. First, place the scooter on the centre stand and start by removing the plastic cover located at the bottom of the footboard and under the seat; this will give you access to the top of the cylinder head, as shown in the video. At this point, disconnect the spark plug coil connector, using a socket wrench with an extension to unscrew and remove the spark plug; screw in the new one by hand and tighten gently with the wrench, then reconnect the coil.

Posted on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Jet 14 125 In order to replace the cylinder of the Sym Jet 125, you need to loosen the screws that hold it to its housing, in the upper part of the engine block…
Jet 14 125 These brief and simple steps will show you how to change the engine oil while performing routine maintenance on the Sym Jet 14 125 scooter. First, pl…
Jet 14 125 In this tutorial, learn how to change the engine oil in the SYM Jet 14 125 scooter, a very simple and quick operation. First, wait for the engine to …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos