Do it yourself
Frequently asked questions about cars and motorcycles

How to Install the Windscreen on the Sym Jet 14 125?

Model: Sym Jet 14 125
Part: Windshield

Video tutorial

To install the windscreen on the Sym Jet 14 125, use a tool to lever off the trim located beneath the front fairing. Once this trim is removed, you can unscrew all the screws underneath and access the panel at the top of the fairing.

After removing this panel, insert the new windscreen so that it can be properly secured. After installation, ensure that it is firmly attached.


Updated on 5 November 2026 by ScegliAuto


Related tutorials

Jet 14 125 To replace the speedometer cable on the Sym Jet 14 125, you need to loosen the screws that secure the windscreen to its housing, completely removing …
Jet 14 125 It will be possible to replace the air filter of the Sym Jet 14 125 by loosening the screws that secure the cover of the filter box located on the le…
Jet 14 125 It will be possible to completely reset the Service light of the Sym Jet 14 125 by inserting the ignition key into the corresponding slot: once the d…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos