Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the engine light of the Sym Jet 14 125?

Model: Sym Jet 14 125
Part: Warning light – error code

Video tutorial

In order to reset the engine light of the Sym Jet 14 125, it is necessary to connect a diagnostic tool to the OBD port of the vehicle: this port can be found under the inner fairing of the front part of the motorcycle. Once the scanner is connected, the source of the error causing the light to come on can be identified: this way, it will be possible to address and resolve it. Once the operation is complete, the instrument panel can be turned on again, and it will be noticed that the engine light has been reset and will not come on again.


Posted on 29 December 2024 by ScegliAuto


Related tutorials

How to reset the engine oil light on the Sym Jet 14 125
How to reset the engine oil light on the Sym Jet 14 125
Jet 14 125 Today's steps will show us the process of resetting the maintenance service light of the engine oil change for the Sym Jet 14 125 scooter. First, we …
How do you reset the Service light on the Sym Jet 14 125?
How do you reset the Service light on the Sym Jet 14 125?
Jet 14 125 It will be possible to completely reset the Service light of the Sym Jet 14 125 by inserting the ignition key into the corresponding slot: once the d…
How to Reset the Service Light on the Sym Jet 14 125?
Jet 14 125 To reset the Sym Jet 14 125, turn on the ignition by inserting the key into the ignition switch: once the dashboard is on, press and hold the S butto…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos