Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the motor oil in the Yamaha XT 225?

Model: Yamaha Xt 225
Part: Engine oil

Video tutorial

In this tutorial we can see how to replace the engine oil in the Yamaha XT 225, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then remove the lower protective cover and place a container underneath the motorcycle.

Next, locate the drainage hole bolt, unscrew it using a 19mm socket wrench and let all the oil in the system drain out. At this point, all that's left to do is to open the filter cap, insert the replacement, reassemble everything and pour the necessary amount of oil through the appropriate hole.


Posted on 5 February 2025 by ScegliAuto


Related tutorials

How to Replace the Clutch on the Yamaha XT 225?
How to Replace the Clutch on the Yamaha XT 225?
Xt 225 You can replace the clutch on the Yamaha XT 225 by loosening the screws that secure the protective cover on the left side of the bike: once this cove…
How do you replace the air filter of the Yamaha XT 225?
How do you replace the air filter of the Yamaha XT 225?
Xt 225 To replace the air filter on the Yamaha XT 225, you need to loosen the screws that secure the panel on the left side of the bike: once the screws of …
How to Replace the Front Brake Pads on a Yamaha XT 225?
How to Replace the Front Brake Pads on a Yamaha XT 225?
Xt 225 In this tutorial, see how to replace the front brake pads on a Yamaha XT 225, a very simple and quick operation. First, position yourself in front of…

How to Remove the Radiator from an Aprilia RSV 1000R

This guide provides the main instructions for removing and replacing the cooling radiator of the Aprilia RSV 1000R motorcycle. First, place your motorcycle on a stand and start unscrewing the fixing screws of the side plastic fairings to remove them; then disconnect the radiator hoses, draining the fluid into a container, and unscrew the bracket screws to remove it from the frame and engine, as illustrated in the video. At this point, install the new radiator and finally top up with the new antifreeze!

Watch the video!


by ScegliAuto

More videos