Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Transmission Control Module Located on the Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Drivetrain

In this video, you can see where the transmission control module is located on the Ford Fiesta and how to proceed if you need to remove it. As shown, it is positioned in the upper area of the transmission and is accessible directly from the engine bay. To remove it, first disconnect both battery terminals, starting with the negative. Then, remove the relevant support and the entire air filter housing. At this point, you can unscrew the module's securing bolts, disconnect the large connector, and separate it from the transmission.

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TCM Module on a Ford Fiesta?
How to Reset the TCM Module on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this tutorial, you will learn how to reset the TCM module on a Ford Fiesta, which is the module that manages the automatic gearbox. This procedure…
How to deactivate the immobiliser of the Ford Fiesta?
How to deactivate the immobiliser of the Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) To deactivate the immobiliser of the Ford Fiesta, you need to completely remove the module that regulates its operation, so it can be replaced with a…
How to disassemble the ABS module on a Ford Fiesta or Focus
How to disassemble the ABS module on a Ford Fiesta or Focus
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this video, we see how to disassemble the ABS module on a Ford vehicle: the module is located right under the windshield wiper, and to reach it we…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos