Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the TCM Module on a Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Warning light – error code

In this tutorial, you will learn how to reset the TCM module on a Ford Fiesta, which is the module that manages the automatic gearbox. This procedure can be useful in case of system malfunction, which is unfortunately quite common in this model. First, enter the vehicle, then position the gear lever in the "P" position and deactivate any devices. Next, turn off the ignition, turn it back on while pressing the brake pedal, and slowly move the gear lever to the "L" position. If the procedure has been executed correctly, the message "Transmission ready" will appear on the display.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this video, we see how to disassemble the ABS module on a Ford vehicle: the module is located right under the windshield wiper, and to reach it we…
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) To deactivate the immobiliser of the Ford Fiesta, you need to completely remove the module that regulates its operation, so it can be replaced with a…
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video, see how to reinitialize the Sync module on a Ford Fiesta (the procedure is the same for all Ford vehicles). Tap the phone button until…

    Frequently Asked Questions

    • Fiesta 2008-2017 - What do the dashboard lights on a Ford Fiesta indicate? Read answer
    • Fiesta 2002-2008 - Why is the engine malfunction indicator flashing in the Ford Fiesta? Read answer
    • Fiesta 2002-2008 - How to reset the car stereo in the Ford Fiesta? Read answer
    • Fiesta 2008-2017 - What are the warning lights on the dashboard of the 2008 Ford Fiesta? Read answer
    • Fiesta 2008-2017 - How to reset the airbag warning light in the Ford Fiesta? Read answer
    • Fiesta 2008-2017 - How to find the car radio code of a Ford Fiesta? Read answer
    • Fiesta 2002-2008 - Why does the Ford Fiesta door open light stay on? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos