Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cigarette Lighter Socket on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Cigarette lighter

See other generations:
Video tutorial

This brief and simple guide will outline the steps to disassemble and replace the entire cigarette lighter socket on a Ford Fiesta. First, get inside the vehicle and start prying off the plastic cover of the centre console using thin plastic levers; also detach the gear knob cover as shown in the video.

At this point, disconnect and remove the cigarette lighter socket by unplugging the electrical connector found underneath; remove and replace the cigarette lighter socket or the USB socket, following the video tutorial to the end!


Updated on 18 August 2026 by ScegliAuto


Related tutorials

How to Repair and Replace the Cigarette Lighter Socket on a Ford Fiesta
How to Repair and Replace the Cigarette Lighter Socket on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this brief guide, we will cover the main instructions for replacing or repairing the cigarette lighter socket on a Ford Fiesta. First, get inside …
Changing the Cigarette Lighter on a Ford Fiesta
Changing the Cigarette Lighter on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this video, our YouTuber will show you how to change the cigarette lighter on a Ford Fiesta: first, use a plastic spatula to remove the centre con…
How to replace the fuse of the cigarette lighter socket of the Ford Fiesta MK6
How to replace the fuse of the cigarette lighter socket of the Ford Fiesta MK6
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Today we will explain how to replace the fuse of the cigarette lighter socket on a Ford Fiesta MK6 model car. The fuse replacement is necessary when …

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos