Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuse of the cigarette lighter socket of the Ford Fiesta MK6

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuse box

See other generations:
Video tutorial

Today we will explain how to replace the fuse of the cigarette lighter socket on a Ford Fiesta MK6 model car. The fuse replacement is necessary when the socket stops working. The fuse is located inside the fuse box behind the glove compartment on the driver's side.

To remove the compartment, we will need to push on the sides and gently pull it out. The fuse in question is labeled F22 with 20 Amps. We remove the fuse using a needle-nose pliers and then insert the new one with the same amperage. We close the fuse box and test the operation of the socket.


Posted on 4 January 2025 by ScegliAuto


Related tutorials

How to Repair and Replace the Cigarette Lighter Socket on a Ford Fiesta
How to Repair and Replace the Cigarette Lighter Socket on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this brief guide, we will cover the main instructions for replacing or repairing the cigarette lighter socket on a Ford Fiesta. First, get inside …
How to Replace the Cigarette Lighter Socket on a Ford Fiesta
How to Replace the Cigarette Lighter Socket on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) This brief and simple guide will outline the steps to disassemble and replace the entire cigarette lighter socket on a Ford Fiesta. First, get inside…
Where is the cigarette lighter fuse on the Ford Fiesta?
Where is the cigarette lighter fuse on the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) The fuse for the cigarette lighter socket on the 2010 Ford Fiesta is located inside the fuse box within the vehicle. Specifically, the fuse is found …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos