Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Grille on the Toyota Belta Vios

Model: Toyota Belta Vios Xp150 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Grille

See other generations:
Video tutorial

As shown in the video, replacing the front grille on the Toyota Belta Vios is a simple task. First, remove all the front cover bolts.

Some bolts are located inside near the front tires and need to be unscrewed. Continue by unscrewing all the bolts at the top near the engine once you open the hood.

Remove the front cover or simply try to open it and take out a spacer as shown in the video. The grille will also need to be unbolted and freed from its clips.

At this point, install the new grille by reversing all the steps.


Updated on 26 July 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Toyota Belta Vios?
How to Replace the Battery in a Toyota Belta Vios?
Toyota Belta Vios (2013-2023 / Xp150) To replace the battery in a Toyota Belta Vios, open the hood to access the components inside the engine compartment. The battery is located on the ri…
How to Remove the Front Bumper of the Toyota Belta Vios?
How to Remove the Front Bumper of the Toyota Belta Vios?
Toyota Belta Vios (2005-2012 / Xp90) To remove the front bumper of the Toyota Belta Vios, open the hood to access the screws that secure the bumper from the top. Once these screws are lo…
How do you activate the cruise control of the Toyota Belta Vios?
How do you activate the cruise control of the Toyota Belta Vios?
Toyota Belta Vios (2005-2012 / Xp90) In order to activate the cruise control of the Toyota Belta Vios, you need to start the engine and drive until you reach the desired cruising speed: …

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos