Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Repair of the Front Grille on a Toyota Yaris MK3

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Grille

See other generations:
Video tutorial

In this video, see how to replace the front grille on a Toyota Yaris MK3: start by removing the eight screws located at the top of the bumper, then remove the ten clips inside the wheel arches on both sides. At the bottom, remove 14 clips and three screws, then you can take off the bumper by disconnecting the electrical connectors for the fog lights.

If you wish to replace the grille, you can find the spare part on Amazon with code B08ZM9SNL2 for £42.90 plus £8 delivery. However, the YouTuber will show you how to repair it, which requires more preparation, tools, and skills, especially when handling plastics.

A good job is done with some clips on the back of the grille, which are then re-glued. Finally, refit it by following the reverse process.


Updated on 6 November 2026 by ScegliAuto


Related tutorials

How to disassemble the front seat of the Toyota Yaris
How to disassemble the front seat of the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Today we will discover the instructions that will allow us to disassemble and replace the front seat of the Toyota Yaris, in simple and quick steps. …
How to Repair the External Wing Mirror on a Toyota Yaris
How to Repair the External Wing Mirror on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Today, you will learn how to repair the external wing mirror on a Toyota Yaris independently and at a low cost. If the mirror is not particularly dam…
How to Replace the Fog Lights on a Toyota Yaris
How to Replace the Fog Lights on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) To remove the fog lights on a Toyota Yaris, use a flathead screwdriver to lever and lift the grille around the light, disengaging its retaining clips…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos