Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris
    4. : How do you replace the fog lights of the Toyota Yaris?

Toyota Yaris - Video tutorial

Model: Toyota Yaris Xp10 - Years 1999-2005
Part: Fog lights
Operation: How do you replace the fog lights of the Toyota Yaris?

In order to remove the Toyota Yaris fog lights, a slotted screwdriver must be used to pry and lift the grille around the headlight, disengaging its retaining clips. Next, it will be necessary to unscrew the screws located on the inside of the front bumper: this operation must be carried out after removing the front bumper. When the screws have been loosened, the headlight can be removed and it will be possible to replace the bulbs by connecting them to the relative connector. Once the replacement has been completed, the fog lights can be repositioned.


Posted on 28 February 2024 by ScegliAuto



Where are the 2006 Toyota Yaris fuses located?
Toyota Yaris (2005-2011 / Xp90) The 2006 Toyota Yaris fuses are located inside the fuse boxes located inside the vehicle. In this model of car, the boxes that contain the fuses are
Where are the fuses of the Toyota Yaris iA located?
Toyota Yaris (2011-2019 / Xp130) The fuses of the Toyota Yaris iA are located inside the special fuse boxes of the car: in this model there are two. The first is located inside the p
How to replace fog light bulbs in Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) In today's video we see how to replace the fog light bulbs in the third series of the Toyota Yaris. First we rotate the steering in the opposite dire

Other guides that may interest you

    Frequently Asked Questions

    • Yaris 2005-2011 - How do you replace the fog lights of the Toyota Yaris? Read Answer
    • Yaris 2020-2027 - Where is the button to operate the fog lights in the Toyota Yaris? Read Answer

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos