Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Toyota Belta Vios

Model: Toyota Belta Vios Xp150 - Years 2013-2023
Part: Air filter

If you need to replace the air filter on this vehicle model, you will find the information and instructions on how to proceed in the description below and also by referring to the video. After opening the hood, locate the filter housing on the left side. Then, unclip the steel clips around the cover. Lift the cover and remove the old filter from its housing, then replace it with the new one, ensuring you have verified the compatibility of the replacement part with the vehicle type. Next, reposition the cover and reattach the steel clips, and the job is complete.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Toyota Belta Vios?
How to Replace the Battery in a Toyota Belta Vios?
Toyota Belta Vios (2013-2023 / Xp150) To replace the battery in a Toyota Belta Vios, open the hood to access the components inside the engine compartment. The battery is located on the ri…
How to Remove the Front Bumper of the Toyota Belta Vios?
How to Remove the Front Bumper of the Toyota Belta Vios?
Toyota Belta Vios (2005-2012 / Xp90) To remove the front bumper of the Toyota Belta Vios, open the hood to access the screws that secure the bumper from the top. Once these screws are lo…
How do you activate the cruise control of the Toyota Belta Vios?
How do you activate the cruise control of the Toyota Belta Vios?
Toyota Belta Vios (2005-2012 / Xp90) In order to activate the cruise control of the Toyota Belta Vios, you need to start the engine and drive until you reach the desired cruising speed: …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos