Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on a Toyota Corolla?

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: Front bumper

In this tutorial, see how to remove the front bumper on a Toyota Corolla, a very simple and quick operation. First, open the bonnet. Next, remove all the clips located on the top side of the grille and, using a 10 mm socket, undo the various bolts. Move to one of the wheel arches, extract the additional clips indicated, and repeat the operation on the opposite side. At this point, undo all the bolts located underneath the bumper, grasp it from one of the two ends, and separate it from the chassis. To fit the replacement, simply follow the reverse procedure.

Posted on 24 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper of the Toyota Corolla
How to Remove the Front Bumper of the Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Today, learn how to remove the front bumper of a vehicle quickly and easily. To remove the front bumper on a Toyota Corolla produced from 2006 to 201…
Removing and Replacing the Front Bumper on Toyota Corolla
Removing and Replacing the Front Bumper on Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) This guide will show you how to remove and replace the front bumper on a Toyota Corolla, following the instructions below. First, open the bonnet of …
How to Replace the Front Bumper on a Toyota Corolla
How to Replace the Front Bumper on a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) In this short and simple guide, we will go through the steps to remove and replace the front bumper on a Toyota Corolla, following the instructions b…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos