Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Toyota Corolla

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Front bumper

See other generations:
Video tutorial

Today, learn how to remove the front bumper of a vehicle quickly and easily. To remove the front bumper on a Toyota Corolla produced from 2006 to 2013, you need to: - open the bonnet; - unscrew the five upper screws; - remove the screw covers; - unscrew the left and right side screws; - unscrew the lower screws; - pull out the bumper; - disconnect the central connector; - remove the bumper.

Once the bumper is removed, you can perform any maintenance you wish on your vehicle, from changing the badge to fitting a new bumper.


Updated on 22 September 2026 by ScegliAuto


Related tutorials

How to remove the rear bumper from a Toyota Corolla
How to remove the rear bumper from a Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Before you can begin, open the tailgate of the boot on your Toyota Corolla. Start by unscrewing and removing the screws that secure the rear bumper t…
Removing and Replacing the Front Bumper on Toyota Corolla
Removing and Replacing the Front Bumper on Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) This guide will show you how to remove and replace the front bumper on a Toyota Corolla, following the instructions below. First, open the bonnet of …
Replacement of the front bumper of the Toyota Corolla
Replacement of the front bumper of the Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) Following these short and simple steps, we will see how to disassemble and replace the front bumper of the Toyota Corolla. First, open the hood of th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos