Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Replacing the Front Bumper on Toyota Corolla

Model: Toyota Corolla MK 5, E210 - Years 2019-2026
Part: Front bumper

This guide will show you how to remove and replace the front bumper on a Toyota Corolla, following the instructions below. First, open the bonnet of the vehicle and start unscrewing all the fixing screws found above and below the front bumper; also remove the clips located on the bumper and on both sides of the front wheel arches, as shown in the video. At this point, remove the front bumper grille, then unclip the bumper from the sides until it is completely removed; apply the reverse procedure for reassembly!

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear bumper from a Toyota Corolla
How to remove the rear bumper from a Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Before you can begin, open the tailgate of the boot on your Toyota Corolla. Start by unscrewing and removing the screws that secure the rear bumper t…
Replacement of the front bumper of the Toyota Corolla
Replacement of the front bumper of the Toyota Corolla
Toyota Corolla (2013-2019 / MK 4, E170, E160) Following these short and simple steps, we will see how to disassemble and replace the front bumper of the Toyota Corolla. First, open the hood of th…
Removing Front Bumper on Toyota Corolla-Auris
Removing Front Bumper on Toyota Corolla-Auris
Toyota Corolla (2000-2007 / MK 2) In this video tutorial, you will see the instructions for removing the bumper on various Toyota models, particularly the Corolla and Auris. First, op…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos