Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Bumper on Toyota Corolla-Auris

Model: Toyota Corolla MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Front bumper

See other generations:
Video tutorial

In this video tutorial, you will see the instructions for removing the bumper on various Toyota models, particularly the Corolla and Auris. First, open and lift the car's bonnet: use a screwdriver to remove the upper screws of the plastic cover of the bumper and take out the clips by levering them.

Next, move to the wheel arch area, removing the additional clips with pliers: then start to unclip the bumper from the sides and finally remove the screws found underneath the bumper. Gently unclip the bumper and remove it, as shown in the video!


Updated on 31 March 2026 by ScegliAuto


Related tutorials

Removing and Replacing the Front Bumper on Toyota Corolla
Removing and Replacing the Front Bumper on Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) This guide will show you how to remove and replace the front bumper on a Toyota Corolla, following the instructions below. First, open the bonnet of …
How to remove the rear bumper from a Toyota Corolla
How to remove the rear bumper from a Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Before you can begin, open the tailgate of the boot on your Toyota Corolla. Start by unscrewing and removing the screws that secure the rear bumper t…
Replacement of the front bumper of the Toyota Corolla
Replacement of the front bumper of the Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) Following these short and simple steps, we will see how to disassemble and replace the front bumper of the Toyota Corolla. First, open the hood of th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos