Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front bumper of the Toyota Corolla

Model: Toyota Corolla E160, E170, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Front bumper

See other generations:
Video tutorial

Following these short and simple steps, we will see how to disassemble and replace the front bumper of the Toyota Corolla. First, open the hood of the car and start unscrewing all the fastening screws you find on the top and bottom of the bumper; then unscrew the additional screws located on both sides of the front wheel arches, detaching the bumper until it is completely removed.

At this point, perform the repair or replacement of the front bumper, fixing it correctly on the sides and on the front, following the video tutorial until the end!


Posted on 18 July 2025 by ScegliAuto


Related tutorials

How to remove the rear bumper from a Toyota Corolla
How to remove the rear bumper from a Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Before you can begin, open the tailgate of the boot on your Toyota Corolla. Start by unscrewing and removing the screws that secure the rear bumper t…
How to Replace the Front Headlight Bulb on a 2002 Toyota Corolla Verso
How to Replace the Front Headlight Bulb on a 2002 Toyota Corolla Verso
Toyota Corolla (2000-2007 / MK 2) This video shows how to remove and replace the front headlight bulb on a 2002 Toyota Corolla Verso in simple, quick steps. First, remove the central …
How to Remove the Front Seat on Toyota Corolla
How to Remove the Front Seat on Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Need to remove the front seat from the Toyota Corolla? Start by removing the seat and replacing it with a new one. Slide the seat back and raise the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos