Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight on a Toyota Corolla

Model: Toyota Corolla MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Headlight

See other generations:
Video tutorial

This guide will explain how to remove and replace the front headlight assembly on a Toyota Corolla, following the instructions below. First, open the car's bonnet and start unscrewing the fixing screws located at the top of the front bumper; then unscrew the screws on both sides of the front wheel arches to detach and remove the bumper, as shown in the video.

At this point, unscrew the fixing screws of the headlight, disconnect the electrical connector to remove it, and replace it with the new one!


Updated on 23 July 2026 by ScegliAuto


Related tutorials

How to replace the headlight bulb of the Toyota Corolla
How to replace the headlight bulb of the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Replacing the front headlight bulb of your new Toyota Corolla is really very simple. To complete the operation in question, just read the following g…
Replacing Front Headlamp Bulbs on Corolla
Replacing Front Headlamp Bulbs on Corolla
Toyota Corolla (2006-2013 / MK 3) Replace the front headlamp bulbs on a Toyota Corolla. Lift the bonnet and secure it. Remove the plastic rivets from the cover above the headlamps, th…
How to Replace the Front Headlamp on a Toyota Corolla?
How to Replace the Front Headlamp on a Toyota Corolla?
Toyota Corolla (1995-2002 / MK 1) To replace the front headlamp on a Toyota Corolla, open the bonnet to access the screws securing it from the top. Once the screws at the top of the u…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos