Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlights on a Toyota Corolla?

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight

See other generations:
Video tutorial

In this tutorial, we will see how to replace the front headlights on a Toyota Corolla, a very simple and quick operation. First, let's make sure that the instrument panel is off, so we can work safely.

Then, we open the hood, unscrew the bolts located on the upper edge of the grille using a 10mm socket wrench, and remove the side plastic rivets. Next, we remove both the rivets accessible from the wheel wells and those located on the lower edge, unscrew the last bolts, and separate the bumper from the frame.

At this point, we just need to unscrew the three fastening bolts of the headlights, disconnect the power connectors, and install the new parts.


Posted on 3 December 2025 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Toyota Corolla
How to Replace the Front Brake Pads on a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) This guide provides instructions on how to remove and replace the front brake pads on a Toyota Corolla in simple and quick steps. First, lift the veh…
How to Remove the Front Seat from My Toyota Corolla?
How to Remove the Front Seat from My Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) This short video shows how to remove the front seats from a Toyota Corolla in a few simple steps. First, open the bonnet and disconnect the battery. …
How to Remove the Front Seat on Toyota Corolla
How to Remove the Front Seat on Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Need to remove the front seat from the Toyota Corolla? Start by removing the seat and replacing it with a new one. Slide the seat back and raise the …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos