Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : How do you remove the front headlight of the Toyota Auris?

Toyota Corolla - Video tutorial

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: Headlight
Operation: How do you remove the front headlight of the Toyota Auris?

In order to remove the front headlight of the Toyota Auris, you need to open the hood so that you can locate the screws and rivets that secure the front bumper of the car: these screws will be found at the top of the bumper, at the bottom, and inside the wheel arches. Once the bumper has been completely removed, you will be able to locate the screws that secure the front headlight: by unscrewing all these screws and disconnecting the connectors located inside the optical group, you will be able to remove it completely in order to insert the new piece.


Posted on 8 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Corolla 2006-2013 - Why is the low beam headlight of the Toyota Corolla not working? Read Answer
    • Corolla 1995-2002 - What kind of bulb does it take for the sidelights of the Toyota Corolla Verso? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos